A novel three‐dimensional tetranuclear CoII coordination polymer with water hexamers based on the V‐shaped tetracarboxylate ligand 4‐(2,4‐dicarboxylatophenoxy)phthalate

A new coordination polymer (CP), namely, poly[[diaquatris[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]bis[μ₆‐4‐(2,4‐dicarboxylatophenoxy)phthalato]tetracobalt(II)] hexahydrate], {[Co₄(C₁₆H₆O₉)₂(C₁₂H₁₀N₄)₃(H₂O)₂]·6H₂O}_n, has been synthesized by solvothermal reaction. The CP was fully characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis, and powder and single‐crystal X‐ray diffraction. It presents a three‐dimensional (3D) structure based on tetranuclear Co^II secondary building units (SBUs) with a tfz‐d net and point symbol (4³)₂(4⁶·6¹⁸·8⁴). The 4‐(2,4‐dicarboxyphenoxy)phthalic acid (H₄dcppa) ligands are completely deprotonated and link {Co₄(COO)₄}^4? SBUs into two‐dimensional (2D) layers. Furthermore, adjacent layers are connected by 1,4‐bis(1H‐imidazol‐1‐yl)benzene (bib) ligands, giving rise to a 3D supramolecular architecture. Interestingly, there are numerous elliptical cavities in the CP where isolated unique discrete hexameric water clusters have been observed. The results of thermogravimetric and magnetic analyses are described in detail.     

射频溅射法制备Pb_(1-x)Co_xSe薄膜及物性研究

利用复合靶共溅射法制备了半磁性半导体 Ｐｂ１－ ｘ Ｃｏｘ Ｓｅ 薄膜．研究了薄膜的成分结构以及电阻率温度特性和磁化率温度特性间的关系．结果表明：由于 Ｃｏ 离子介入, Ｐｂ１－ ｘ Ｃｏｘ Ｓｅ 发生了由金属特性向半导体特性的转变,在充分低的温度下,并伴有磁相转变．磁相转变温度与磁性离子浓度相关,磁化率的相对变化幅度与磁性离子浓度有关     

Elastic properties of poly(hydroxybutyrate) molecules

Elasticity of various poly(hydroxybutyrate) (PHB) molecules of regular and irregular conformational structure was examined by the molecular mechanics (MM) calculations. Force - distance functions and the Young's moduli E were computed by stretching of PHB molecules. Unwinding of the 2(1) helical conformation H is characterized at small deformations by the Young's modulus E = 1.8 GPa. The H form is transformed on stretching into the highly extended twisted form E, similar to the beta-structure observed earlier by X-ray fiber diffraction. The computations revealed that in contrast to paraffins, the planar all-trans structure of undeformed PHB is bent. Hence, a PHB molecule attains the maximum contour length in highly straightened, but slightly twisted conformations. A dependence of the single-chain moduli of regular and disordered conformations on the chain extension ratio x was found. The computed data were used to analyze elastic response of tie (bridging) molecules in the interlamellar (IL) region of a semi-crystalline PHB. A modification of the chain length distribution function of tie molecules tau(N) due to secondary crystallization of PHB was conjectured. The resulting narrow distribution tau(N) comprises the taut tie molecules of higher chain moduli prone to overstressing. The molecular model outlined is in line with the macroscopically observed increase in the modulus and brittleness of PHB with storage time.     

Simple and extractionless high-performance liquid chromatographic determination of rosiglitazone in human plasma and application to pharmacokinetics in humans

A simple and extractionless HPLC method using fluorescence detection was developed for the determination of rosiglitazone in human plasma. After deproteinization using perchloric acid the plasma samples were directly injected onto the HPLC system. The mobile phase was composed of acetonitrile (52%) and 20 mm ammonium acetate (48%, pH 7.5), and analysis was run at a flow rate of 0.2 mL/min with the detector operating at 247 nm for excitation wavelength and at 367 nm for emission wavelength, respectively. The method has a mean recovery of 97%, while the intra-day and inter-day precisions were all less than 7%. This method is simple, specific, sensitive and requires only a small plasma volume with short analytical time, and is suitable for the determination of plasma rosiglitazone in routine measurements for pharmacokinetic studies.     

高能强子–强子碰撞中喷注性质的蒙特卡洛研究

在喷注“圆锥判定法”的基础上,对高能强子–强子碰撞中产生的喷注(微喷注)的性质进行了蒙特卡洛研究.采用以喷注动量为z轴的“喷注坐标系”,给出了表征喷注性质的各物理量在新坐标系中的分布情况.结果表明,圆锥判定法能够作为一种有效手段来对高能强子–强子碰撞和相对论重离子碰撞中发生的硬和半硬过程开展实验研究.由有喷注事件和无喷注事件的多重数分布可以看到,E_t=2GeV是用圆锥法确定喷注的合理的横能截断值.     

Exact Distribution of the Distances between Any Occurrences of a Set of Words

The distribution of the distance between two (or more) successive occurrences of a specific word in a random sequence of letters is known under different models. In this paper, a more general problem is studied: the distribution of the distance between two (or more) successive occurrences of any word of a given set under a Markov model for the sequence. The generating function and a recurrence for obtaining the probabilities are given. These results are applied to study the distribution of the "CHI" motif in the genome sequence of Haemophilus influenzae.     

High‐order 𝒞1 finite‐element interpolating schemes—Part I: Semi‐Lagrangian linear advection

This paper is devoted to the development of accurate high‐order interpolating schemes for semi‐Lagrangian advection. The characteristic‐Galerkin formulation is obtained by using a semi‐Lagrangian temporal discretization of the total derivative. The semi‐Lagrangian method requires high‐order interpolators for accuracy. A class of ??¹ finite‐element interpolating schemes is developed and two semi‐Lagrangian methods are considered by tracking the feet of the characteristic lines either from the interpolation or from the integration nodes. Numerical stability and analytical results quantifying the amount of artificial viscosity induced by the two methods are presented in the case of the one‐dimensional linear advection equation, based on the modified equation approach. Results of test problems to simulate the linear advection of a cosine hill illustrate the performance of the proposed approach. Copyright © 2007 John Wiley & Sons, Ltd.     

子群的半覆盖—避开性与有限群的结构

设G是有限群,H为G的子群.如果存在一个主群列1=G_0(?)G_1(?)…(?) G_(n-1)(?)G_n=G,使得对每个i=1,2,…,n,或者H覆盖G_i/G_(i-1),或者H避开G_i/G_(i-1),则称H为G的半覆盖—避开子群.利用G的Sylow子群的极大子群,Sylow子群的2-极大子群的半覆盖—避开性得到了群的可解性,p-幂零性的判别,同时得到了群系的一些结论.     

Time and temperature induced phase transformation in L‐isoleucine hydrochloride monohydrated crystal

Semi organic crystals have been intensively studied aiming applications in nonlinear optical (NLO). Such applicability requires crystals with both high quality and thermal stability, which make the full characterization of this material a topic issue. In this paper, single crystals of L‐isoleucine hydrochloride monohydrated (L‐Ile.H2O.HCl) was synthesized by slow evaporation technique and characterized by thermal analysis and X‐ray diffraction (XRD) measurements. XRD results at 298 K showed that the sample crystallize with the orthorhombic structure, and the lattice parameters obtained by Rietveld refinement were a = 5.873(3) Å, b = 24.814(4) Å, and c = 6.873(5) Å. Thermal analysis measurements shows four decomposition stages between 328 ‐480 K which were associated with loss of water by desolvation, loss crystallization water and decomposition of L‐Ile.HCl. XRD measurements as a function of temperature up to 428 K show an irreversible phase transformation. This transformation was obtained after 32 hours keeping the L‐Ile.HCl.H2O sample at 413 K. The analysis shows that phase transformation occurs due to water and chlorine losses without destroy the amino acid carbon chain and in the end of transformation only the precursor amino acid remains. L‐Ile.HCl.H2O present low thermal stability and the phase transformation is time and temperature dependent.     

Synthesis,characterization, and crystallization of thermoplastic aromatic semi‐crystalline poly(ester‐imide)s based on bis(trimellitic acid anhydride) phenyl ester

A high molecular weight aromatic homopoly(ester‐imide) (homoPEI) was synthesized from homopoly(ester‐amic acids) (homoPEAA), which was obtained from the reaction of bis(trimellitic acid anhydride) phenyl ester (BTAH) with 4‐4'‐oxydianiline ether (ODA). This homoPEI was melt‐processable semi‐crystalline polymer and displayed dual endothermic transitions which were attributed to the different levels of crystal perfection and size in the crystal structures. Four high molecular weight aromatic copoly(ester‐imide)s (coPEIs) were synthesized via copoly(ester‐amic acids)s (coPEAA) from the reaction of 4, 4'‐oxydiphthalic anhydride (ODPA) and BTAH with ODA. The molar percentage of BTAH varied from 10 to 40%. When the molar percentages of BTAH were 30 and 40%, the resulting two coPEIs were crystallinable and their melting temperatures were 361°C and 356/371°C, respectively. Differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD) results indicated that the crystal structures included short segments of BTAH/ODA and ODPA/ODA. The initial crystallization of the two coPEIs took place during imidization process. Thermogravimetric (TA) and mechanical analysis confirmed that both homoPEI and coPEIs showed almost no weight loss until 400°C in N₂ and good mechanical properties. Copyright © 2009 John Wiley & Sons, Ltd.